Boiler Accessories

Boiler Sensor SR2

The SR2 is used for monitory conductivity in a boiler blowdown line. The SR2 cannot be used after a sample cooler.

  • Body Carbon Steel
  • Electrodes 416SS
  • Insulator Peek
  • Max Pressure 600 psi (41.4 bar)
  • Max Temperature 460° F (238°C)
  • Cable 20 ft High temp
  • Process thread ¾ inch MNPT
  • Conduit connection ¾ inch MNPT

Boiler Sensor SR4

The SR4 can be in the boiler blowdown line or with a sample cooler. The SR4 can only be used with the 2250 and 2255.

  • Body 316SS
  • Electrodes Titanium
  • Insulator Peek
  • Max Pressure 250 psi (17.2 bar)
  • Max Temperature 392° F (200°C)
  • Cable 20 ft High temp
  • Process thread ¾ inch MNPT
  • Conduit connection ¾ inch FNPT
  • Temperature comp 4K NTC

MBV1 and MBV2

MBV1 MBV2
Size ½ inch NPT Size ¾ inch NPT
Body Carbon Steel Body Carbon Steel
Rating 250 psi @ 400° F (17.2 bar @ 204°C) Rating 250 psi @ 400° F (17.2 bar @ 204°C)
Seals Reinforced TFE Seals Reinforced TFE
Ball 316SS Ball 316SS

PL5

The PL5 is used as a sample/cycle method in boilers. The orifice restricts flow near the boiler sensor to prevent steam flashing during a sample. The PL6 can also be used as a PL5.

PL6

The PL6 is used for a continuous sampling of a boiler. The lower orifice bleeds a small sample across the sensor. The upper orifice is used with the motorized ball valve and opens when the conductivity is above set point.